Kalorik FT 43875 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution! Never use the Smart Fryer without the trivet in it!
Caution! Do not touch the food basket, trivet, or the inside of the Smart
Fryer during and immediately after use, as they get very hot. Only hold
the food basket by its handle. Always use oven mitts. Unit is hot!
Turn the temperature control dial to the required cooking
temperature (See section' Settings' in this chapter to help determine
the right temperature).
Determine the required preparation time for the ingredients (see
section 'Settings' after this chapter).
To switch the appliance on, turn the timer knob to the required
cooking time.
Add 3 minutes to the preparation time when the appliance is cold or
let the appliance preheat for 3 minutes without any ingredients
inside.
The green power-on light will illuminate and the fryer will quickly start
generating hot air. The timer will start counting down the set time.
The orange light will turn on when the unit starts heating and will turn
off when the set temperature is reached.
During the frying process, the orange "Preheat" light will turn on and
off intermittently. This indicates that the heating element is
maintaining the set temperature.
During cooking, some excess oil and cooking juices from the
ingredients will collect in the bottom of the basket. This is to be
expected.
Some recipes require shaking the food in the basket halfway through
the set time (see section 'Settings' in this chapter). To shake the
ingredients, pull the basket out of the appliance using the handle
and gently, but firmly, shake it. Slide the basket back into the Smart
Fryer and continue to cook.
Note: Because the rapid hot air technology instantly reheats the air inside
of the appliance, pulling the basket briefly out of the appliance during
hot air frying will not disturb the cooking process.
www.KALORIK.com
9
FT 43875 - 170120

Publicité

Table des Matières
loading

Table des Matières