ADEO Services JGP-JH-6005C Notice De Montage - Utilisation - Entretien page 199

R
1
S
Thank you for choosing this product. Upon designing and manufacturing our products, we place all
instructions allow to optimize the lifetime
T
IMPORTANT! IN ORDER TO OBTAIN THE UTMOST SATISFACTION FROM THIS PRODUCT UPON
SETTING IT UP, USING IT, AND MAINTAINING IT, WE RECOMMEND THAT YOU CAREFULLY READ
THIS USER MANUAL BEFORE USING THE PRODUCT. PLEASE PAY ATTENTION TO BASIC WARNINGS
T
RELATING TO SAFETY WITHIN THIS MANUAL, AND KEEP THE MANUAL FOR LATER REFERENCE.
L
L
Contents
1. Intended use of auto surface pump 600W
U
2. Safety Instructions
3. Technical data
Z
4. Assembly
5. Transportation
6. Wintering
A
1. INTENDED USE OF AUTO SURFACE PUMP 600W
O
The product is mainly intended for home supply and irrigation. Do not use it for others purposes.
N After unwrapping the packing, make sure that the product is complete with its accessories (if any). If the
product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this product to another people, please give him also this instruction manual.
Main purpose
• For domestic use around the house and garden
• For irrigation and watering of green areas, vegetable beds and gardens.
• For operation of lawn sprinklers.
• For drawing water (with pre- lter) from ponds, streams, rain barrels, rainwater cisterns and wells.
• For supplying water to the house.
• Fresh water
How it works
pressure due to centrifugal force generated by the movement of the impeller of the pump. When you
turn on the pump, the liquid in the turbine is pushed from the center of the wheel to the periphery by
Introduction
CAREFULLY
Note : This product is not suitable for continuous pump
operation (e.g. continuous circulation in a pond) or as a
stationary installations (e.g. lifting device, fountain pump).
7. Storage
8. Maintenance
9. End of life
10. Warranty
11. CE declaration of conformity
199
EN