Ce Declaration Of Conformity - GMC GMC2302G Traduction Des Instructions Originales

Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA
Ampere, milli-Amp
n0 No load speed
n Rated speed
° Degrees
Ø
Diameter
Hz
Hertz

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union harmonisation
Legislation.
Identification code: 605776
Description: 230mm Angle Grinder 2200W
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EC
• EMC Directive 2014/30/EC
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-3:2011+A2:2013+A11:2014+A12:2014
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2014
• EN61000-3-3:2013
Notified body: Bureau Veritas
The technical documentation is kept by: GMC Tools
Date: 17/09/2015
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH,
United Kingdom.
, DC Direct current
W, kW Watt, kilowatt
/min or min
-1 Operations per minute
rpm Revolutions per minute
dB(A) Decibel sound level (A
weighted)
m/s 2 Metres per second squared
(vibration magnitude)
Specification
Model number: GMC2302G
Voltage: 220 – 240 V~, 50Hz
Power: 2200W
Rated speed: n: 6500min
Disc diameter: Ø230mm
Disc bore diameter: Ø22.2mm
Soft start: Yes
Spindle thread: M14
Ingress protection: IP20
Power cord length: 2.5m
Protection class:
Dimensions (L x W x H): 530 x 120 x 145mm
Weight: 5.1kg
As part of our ongoing product development, specifications of GMC products may alter without notice.
Sound and vibration information:
Sound pressure L : 96.2dB(A)
PA
Sound power L : 107.2dB(A)
WA
Uncertainty K: 3dB
Weighted vibration a : 9.43m/s2
h,AG
Uncertainty: 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are
necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure
if necessary. If sound levels are uncomfortable, even with ear protection, stop using the tool immediately and
check the ear protection is correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and
reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit the length of
time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international
standards. The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration. www.osha.
europa.eu provides information on sound and vibration levels in the workplace that may be useful to domestic
users who use tools for long periods of time.
Carefully read and understand this manual and any label attached to the tool before use. Keep these
instructions with the product for future reference. Ensure all persons who use this product are fully acquainted
with this manual. Even when used as prescribed it is not possible to eliminate all residual risk factors. Use
with caution. If you are at all unsure of the correct and safe manner in which to use this tool, do not attempt
to use it.
7
-1
2
GB