Mounting On A Tripod - PATONA Premium Serie Mode D'emploi

3.1. Mounting on a 1/4 inch bracket
1. Attach the bracket clockwise to the PATONA Premium Photo / Video Soft Light 3.0.
3.2. Mounting the holding device
1. Position the bracket on the PATONA Premium Photo / Video Soft Light 3.0.
2. Screw the bracket on as shown.

3.3. Mounting on a tripod

1. Loosen the wing screw (product overview no. 14) and fasten the
PATONA Premium Photo / Video Soft Light 3.0.
2. Tighten the wing screw again
3.4. Adjustment of the tilt angle
1. Loosen the wing screw of the tilt joint (product overview no. 2) and adjust the tilt angle up to 90°.
2. Tighten the wing screw again.
10