laxihub J1 Guide Rapide page 4

Pairing the Chime
Pair via pressing Doorbell button
Note: The Doorbell and Chime have been configured before leaving the
factory. If the Chime isn't paired by default, please refer to the
following instructions to pair it with the doorbell camera.
Step 1: Supply power to your Chime and Doorbell.
USB compatible
charger(DC5V)
(not included)
Step 2: A short press on the RESET button on the Chime, and you will see
the indicator flashes blue, indicating the device is in pairing mode.
Step 3: Press the doorbell button. When successfully paired, a voice or tone
will be played and the Chime LED status indicator will be in solid blue.
Reset Button
LED Indicator
2
EN