Commissioning; Setup Instructions - SCALESON S220 Mode D'emploi

4.

Commissioning

4.1 Setup instructions

Protect the device from shocks, vibrations, strong heat or cold, drafts, chemicals and moisture by
choosing a location where it will be installed.
Place the scale on a firm, free and horizontal surface.
f
Make sure that no cables or other objects are trapped under the scale.
f
Remove the two transport locks on the bottom of the scale.
f
5. Operation
5.1 Weighing
Step on the scale.
Stand calmly and with both feet on the weighing platform.
The weight determined is displayed immediately.
5.2 Manual zeroing
Manual zeroing corrects small deviations from the zero point.
Set the circular pointer display to „zero" with the aid of the setting wheel. The setting wheel is located
centrally below the front edge of the weighing platform.
10