SCALESON S240 Mode D'emploi page 31

13. Note on electromagnetic compatibility
Recommended safety distances between portable and mobile
RF communication devices and the S240 thermometer
The S240 thermometer is intended for use in the ELECTROMAGNETIC ENVIRONMENT specified below. The custo-
mer or the user of the S240 thermometer can thus help to avoid electromagnetic interference by keeping the mini-
mum distance between portable and mobile HF telecommunication devices (transmitters) and the S240 thermome-
ter - depending on the output line of the communication device, as specified below.
Rated maximum output
power of transmitter W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1:
At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
14. Warranty and after sales
Wartung und Service
The thermometer requires no routine maintenance. However, it is useful to check the accuracy
periodically. The frequency depends on the use and condition of the thermometer. If any deviations are
found, please contact your dealer or the manufacturer.
Guarantee / warranty / liability
The warranty period is 24 months and begins on the day of the first purchase of the product.
Please keep the invoice as proof. In case of service please contact your dealer or the manufacturer
customer service.
In particular, no guarantee is given for damages arising from the following reasons: Unsuitable,
improper storage or use, faulty assembly or commissioning by the customer or by third parties, natural
wear and tear, alterations or interventions, faulty or negligent handling, in particular excessive strain,
chemical, electrochemical, electrical influences or moisture, provided that these are not attributable to
a fault of the manufacturer. If operational, climatic or other influences lead to a significant change in
the conditions or the material condition, the warranty for the perfect overall function of the equipment
is void. The warranty does not cover batteries that were supplied with the initial delivery of the product.
Keep the original packaging for possible return transport!
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1,2 √P
0,12
0,38
1,2
3,8
12
m
80 MHz to 800 MHz
d = 1,2 √P
0,12
0,38
1,2
3,8
12
800 MHz to 2,5 GHz
d = 2,3 √P
0,23
0,73
2,3
7,3
23
31