Troubleshooting - Rozi Litevac R01 Manuel D'instructions

Troubleshooting

5. Please dry the filter and the filter case
completely before assembling back.
7. Put the filter case back to the dust
cup.
*Troubleshooting:
Suction gets weak
Stopped working
Battery doesn't hold a
charge
*Technical Specification:
Battery
Charging time
Battery charger input
Battery charger
output
Working time
Power
Largest Suction
6. After drying, assemble the filter to
the case.
8. Assemble the top cover to the dust
cup.
1. Empty the dust cup
2. Check if the dust cup is installed correctly
3. Check if the filter case and the filter are installed
correctly
4. Clean the filter
1. Charge the vacuum
2. Clean the roller brush and the bearing thoroughly
1. Check if the plug has been inserted correctly
2. Check if the socket is useful
22.2V/2200mAh
4-5 hours
100-240V ~ 50/60Hz 0.3A
26V 0.45A
45min(low speed), 25min(high speed)
120W
9KPa
7