Installing The Instrument; Electrical Installation - NAV Repeater SILVA Star Manuel D'utilisation

2: INSTALLATION

2.1 Installing the instrument

•
Place the adhesive drill template on the desired location for the instrument.
Drill the four screw holes using a 2.8 mm (
for fibre glass. Use a 52 mm (2
hole for the instrument connection socket.
Note! Never drill through the instrument's four mounting holes as the
gasket may be damaged and thus cause leakage. The warranty is not valid
for damage caused by drilling through the mounting holes.

2.2 Electrical installation

The connector is attached to the four pins on the reversed side of the
instrument. The 4-pole jack plug is colour coded
BLACK
RED
Important! Always connect both NMEA in and NMEA return. Connect NMEA
return to ground if the GPS has no NMEA return.
WHITE
YELLOW
Connect a 3 Ampere fast fuse between power
battery and instrument on the plus lead.
7
/ ") drill for wood or 3.2 mm (
64
1
/ ") hole saw to machine the clearance
16
PLUG FUNCTION
Green: +12 V
Yellow: NMEA RETURN
White: NMEA IN
Ground : Ground (0 V)
4
English
1
/ ")
8
CABLE
Own cable
Own cable
Own cable
Own cable