Aukey KM-G12 Mode D'emploi page 12

Getting Started
1. Plug the USB connector of this keyboard into a USB port on your computer or laptop
2. Press "FN + PrtSc" to switch between the 12 lighting effects. Press "FN + Home" to
choose from the 7 color settings. For example, press "FN + PrtSc" once; then press
"FN + Home" repeatedly until you arrive at your desired color
Notes
●
Some lighting effects aren't available in other colors
●
Press "FN + Esc" to turn off all lighting. If you press "FN + Ins" to turn off the surround
lighting on the keyboard panel before turning all lighting off, pressing "FN + Esc"
again won't turn surround lighting on. Use "FN + Ins" to turn surround lighting on
Editing Custom Lighting Effects
1. Press "FN + Pause" repeatedly to choose a gaming lighting effect you want to edit
2. Press "FN + ScrLk" to enter customization mode. The three LED indicators on the top
right of the keyboard will flash rapidly
3. Press any key you want to light up
4. Press "FN + ScrLk" to save your effect
Notes
●
Press a key repeatedly to change the color when editing custom lighting effects
●
You can have up to five custom lighting effects by editing all five default gaming
lighting effects
●
Function key can't be lit up or customized when editing custom lighting effects
●
Press and hold "FN + Del" for three seconds to reset the keyboard back to factory settings
- 10 -