Anti-Calc System - Taurus SlidingPerfect2400 Mode D'emploi

and the temperature control knob; if you do not
operate the steam switch for 25 minutes, you
need to re-power on to activate it.

ANTI-CALC SYSTEM

A special resin filter at the bottom of the water
tank softens the water and prevents scale
build-up in the plate.
Do not use chemical additives, scented
substances or decalcifiers. Failure to comply
with the above-mentioned regulations leads to
the loss of guarantee.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
Press power button during 3 seconds.
Disconnect the appliance from the mains,
empty the water tank (do it after each use) and
let it cool before undertaking any cleaning task.
Put the pipe and power cord into the storage
cabinet.
Safety thermal protector:
The appliance has a safety device, which
protects the appliance from overheating.
Cleaning
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
SAFE STORAGE
Turn off the steam iron, unplug the power plug,
and put the iron into the base.
Pour the water in the water tank (17) into the
sink and fold the steam hose (10).
Bind and fasten the power cord with ties.
CALC CLEANING
AThe machine has an automatic reminder
function for descaling: the descaling reminder
light is on and the buzzer sounds to remind the
user that descaling is needed.
Precautions for descaling function: If your local
water hardness is high (that is, flakes appear
on the soleplate during ironing), you need to
use the automatic descaling function more
often.
1. Please prepare a water container.
2. Make sure that the plug of the product has
been unplugged.
3. Fill the water tank to the maximum water
level (MAX). Note: Do not pour vinegar or other
descaling agents into the water tank.
4. Insert the iron plug into the socket, press
the power button (5) to turn on, and the
temperature adjustment knob (7) to any
position.
5. Hold the iron above the water container and
press and hold the cleaning button (4) until the
indicator light flashes & you hear a short beep.
6. During the descaling process, you will hear a
short buzzer and pumping sound.
7. Wait about 2 minutes for the product to
complete the descaling process. After the
descaling process is complete, the iron will
stop beeping and the descaling indicator light
will stop flashing.
8. Led the product cold down.
9. Unplug the power plug of the iron, wipe the
iron with a cloth, and then put it back into the
base.
10. The descaling container will become hot
during the descaling process. Please wait
about 5 minutes before touching it, let the iron
cool down, and then store it.
11 If necessary, you can repeat steps 1 to 9.
Please make sure that the descaling container
is emptied before starting the descaling
process.
Note: During the descaling process, if no scale
accumulates inside the iron, clean water will
flow out of the soleplate. this is normal.