Publicité
Les langues disponibles
Les langues disponibles
Fitting kit
- 4 « silent block » with steel spacers
- 4 BHc 6x35 screws
Assembly
- Place the "silent block" on the provided belly pan : fit the steel spacer with the flange to the
outside.
- Remove the original belly pan and place the furnished one over by inserting the plastic spacers
between both, at the front fixation level.
- Replace the unit by using the 4 provided BHc 6x35 screws.
- Aluminium railings can be put in option at the air intakes, with silicone. Stick them so they do
not spill over the edges of the belly pan.
Once fitted, the belly pan must have no contact with motor and has to be far
enough from complet exhaust system. Fitting brackets' angles may be a little
modified in order to adjust the accessory to every motorbike (do not fold the
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* Belly pans will be neither retaken nor exchanged in case of rubbing during a "sports" driving, or during the clearing of pavements, uneven road surfaces ... The fitting of Ermax accessories is planned for a normal road use.
* Move hoses so that they do not fall inside the belly pans. Any deterioration due to flows of corrosive products is not guaranteed.
* Aluminium screws are garanted until 6 Nm by our suppliers. Care to excessive clampings which may damage or break screws.
- 2 plastic spacers Ø10 L : 5mm
- 2 pieces of alu nettings 15x3 cm
fixing brackets while fitted on belly pan).
« CAUTION »
FITTING INSTRUCTIONS
XJ6 / XJ6 DIVERSION 2009 → ∞
Without central stand
« BELLY PAN »
Publicité
