Electrical Connection - Teka FS 601 4GG SS LPG Mode D'emploi

Electrical Connection

1. Your oven requires 16 or 32 Ampere fuse according to the appliance's
power. If necessary, installation by a qualified electrician is recommended.
2. Your oven is adjusted in compliance with 220-240V AC/380-415V
AC 50/60Hz.electric supply. If the mains are different from this specified
value, contact your authorized service.
3. Electrical connection of the oven should only be made by the sockets
with earth system installed in compliance with the regulations. If there
is no proper socket with earth system in the place where the oven will be
placed, immediately contact a qualfied electrician. Manufacturer shall
never be responsible from the damages that will arise because of the
sockets connected to the appliance with no earth system. If the ends of
the electrical connection cable are open, according to the appliance type,
make a proper switch installed in the mains by which all ends can be
disconnected in case of connecting / disconnecting from / to the mains.
4. If your electric supply cable gets defective, it should definitely be
replaced by the authorized service or qualfied electricians in order to
avoid from the dangers.
5. Electrical cable should not touch the hot parts of the appliance.
6. Please operate your oven in dry atmosphere.
Electrical connection scheme
380-415V 3N~50/60Hz 380-415V 2N~50/60Hz
220-240V~50/60Hz
400V 3N~50/60Hz
220-240V~50/60Hz
L3
Neutral
Neutre
L2
Live
Earth
Phase L1
Terre
Erdung
H05 VV-F 3G 4 mm² H05 VV-F 5G 1.5 mm²
H05 VV-F 3G 4mm² H05 VV-F 5G 1.5mm² H05 VV-F 4G 1.5mm² H05 VV-F 3G 1.5mm²
15
400V 2N~50/60Hz
L2
Neutral Neutral
Neutre Neutre
Earth Earth
L1
Terre Terre
Erdung Erdung
H05 VV-F 4G 1.5 mm²
220-240V~50/60Hz
220-240V~50/60Hz
L1 Neutral
Neutre
Earth
Terre
Erdung
H05 VV-F 3G 1.5 mm²