Screen Lock; Cleaning & Maintenance - HEALLUX Lorus EPC02-10R Mode D'emploi

Anti-frost
NOTE: When in Comfort-1 or Confort-2, the temperature can't get set.
7) Windows detector function:
Press to turn on/off the windows function, when the logo display in the screen, it
means window function is on.
c) If temperature goes down, heater will stop working and the window logo
twinkling.
d) Press , the heater will go back to former running program, then the windows
logo stop twinkling.

8) Screen lock

No operation for 1 min, keyboard lock automatically.
Press together unlock the keyboard.
will showed only the unit is heating.
IV. Cleaning & maintenance
- Switch off from the power supply before cleaning.
- Using a soft, moist cloth, with or without a mild soap solution, carefully clean the
exterior surface of the product.
- CAUTION: Allow the product to completely cool before handling or cleaning it.
- Do not allow water or other liquids to run into the interior of the product, as this could
create a fire and/or electrical hazard.
Stand-by
27
EN
is