Equalizer; Resume When Power On; Software-Update; Factory Reset - Albrecht Audio DR 450 Mode D'emploi

12.20. Equalizer

Default equalizer is Rock, you may change to Normal, Jazz, Flat, Soundtracks, Classical, Pop,
News or MyEQ.
Every default setting can be adjusted individually. Select any equalizer default setting and enter
the menu by pressing ►. Now you can change the Trebles, Bass or Loudness with ◄/► buttons.
To save your changes just press OK. Your selection will be saved in MyEQ and also be automatically
selected.
Please note that the default equalizers will not be affected by your changes.

12.21. Resume When Power On

The system is default set to resume internet radio playback if you were listening to internet radio or
media center before switch off the unit. If you turn this setting off, the system will start in the main
menu when switching on the unit.

12.22. Software-Update

Update software. If there is an updated software version on the server, the system will notify you
when you return to the main menu.

12.23. Factory Reset

Restore the default settings.
After DR 450 is reset, the system will move to Language setting menu. And it will automatically turn
to Network setting menu once the OSD language is selected
52 English