Tecnolux MWM823ECKU Manuel D'instructions page 15

1) Press the "CONVECTION " key once, "1 0" flash.
2) Keep pressing "CONVECTION" or press "
Note:the temperature can be chosen from 1 0 degrees to 190 degrees.
function.
3) Press the " START/+30SEC./CONFIRM " to confirm the temperature.
4) Press the " START/+30SEC./CONFIRM " to start preheating.When the
preheating temperature arrives, the buzzer will sound twice to remind you to
put the food into the oven. And the preheated temperature is displayed and flash.
5) Put the food into the oven and close the door. Press "
cooking time. (The maximum setting time is 95 minutes.)
6) Press the " START/+30SEC./CONFIRM " key to start cooking.
Note: a. Cooking time cannot be input until the preheating temperature arrives.
If the temperature arrives, door must be opened to input the cooking time.
b. If the time not input in 5 minutes, the oven will stop preheating. The buzzer sound
five times and turn back to waiting states.
6. Convection Cooking( Without pre-heating function)
1) Press the "CONVECTION " key once, "1
2) Keep pressing "CONVECTION" or press "
Note:the temperature can be chosen from 1 0 degrees to 190 degrees.
function.
3) Press the " START/+30SEC./CONFIRM " to confirm the temperature
4) Press " " or "
minutes.)
5) Press the " START/+30SEC./CONFIRM " key to start cooking.
7. Kitchen Timer
(1) Press " CLOCK/KITCHEN TIMER " twice, LED will display 00:00.
(2) Press " " or "
(3) Press "START/+30SEC./CONFIRM " to confirm setting.
(4) When the kitchen time is reached, clock indicator will go out. The buzzer will ring 5 times.
If the clock be set(24-hour system), LED will display the current time.
Note:
a. The kitchen Time is differ from 24-hour system,Kitchen Timer is a timer.
b. When the door is open, Kitchen timer function will continue working.
c. During timer function process, any other program cannot be set.
" to adjust the cooking time. (The maximum setting time is 95
" to enter the correct timer.(the maximum cooking time is 95 minutes)
0
" or " " to select the convection
0
" or "
00" flash.
" or " " to select the convection
0
14
" to adjust the