Mounting The Device - AudioCodes MediaPack 124 Manuel D'installation Abrégé

5 ETHERNET 10/100Base-T Ethernet port (RJ-45) for connecting to the IP network.
LAN LED (located on front panel):
The Reset pinhole button, located on the front panel, resets the device or restores it to factory defaults. To
restore the device to factory defaults: Disconnect the Ethernet cable and then with a paper clip or any other
similar pointed object, press and hold down the button for at least 12 seconds, but no more than 25 seconds.

Mounting the Device

You can mount the device in a standard 19-inch rack, using the two mounting brackets (supplied) which you
first need to attach to the sides of the chassis.
Green On Ethernet link established
Red On Malfunction
Off No Ethernet link
3 | P a g e
EN