Eclipse SiriusConnect ESL-SC1 Guide D'utilisation page 4

WARNING
This symbol means important instructions. Failure to heed them can result in
serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM
SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after com-
ing to a complete stop. Always stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY.
Doing so may result in fire, electric shock or product damage.
DO NOT INSERT ANY OBJECTS INTO THE UNIT.
Doing so may result in fire, electric shock or product damage.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE.
Failure to do so may result in fire, electric shock or product damage.
MAKE THE CORRECT CONNECTIONS.
Failure to make proper connections may result in fire or product damage.
DO NOT SPLICE INTO A ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment. Doing so will ex-
ceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION.
Doing so may obstruct vision or hamper movement which can result in a serious accident.
DO NOT INSTALL THE UNIT WHERE HIGH LEVELS OF HUMIDITY, MOISTURE OR DUST.
Doing so can result in electric shock or product failure
CAUTION
This symbol means important instructions. Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return the unit to your
authorized retailer or nearest service center for repairing.
INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR
SHARP METAL EDGES.
Route the cables away from moving parts or sharp pointed edges. This will prevent crimping
and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a
rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole.
USE THE SPECIFIED ACCESSORY PARTS AND INSTALL THE PRODUCT SECURELY.
Be sure to use only the specified accessory parts. Use of nonspecified parts may damage this
unit internally or may not securely install the unit in place. This may cause parts to become
loose, resulting in hazards or product failure.
USE CAUTION IF YOU NEED TO DISCONNECT THE BATTERY TERMINAL.
Please consult the vehicle's owner's manual or a service technician prior to removing the
battery positive or ground connection, as it may cause damage to the vehicle's electrical system
or require reprogramming of the vehicle's computer controlled devices.
4 ECL-SC1 Installation Guide