Oplink Connected TripleShield Manuel De L'utilisateur page 7

V 2.2.0t1b
encryption
b
c
Internet
a
OPU Installation with Flash Drive
a. Plug the Flash Drive into the OPU.
b. Connect the OPU to the home router using the provided Ethernet Cable.
c. Plug Power Adapter to the OPU and an outlet.
d. Enable router's DHCP setup (see Appendix B for DHCP setting of router).
*Most routers have their DHCP setting set to "Enabled" by default.
Oplink Communications, Inc.
6