Calibrating The Compass - Wegner LED Nomad Mode D'emploi

CaLIBraTING ThE COMpass

10
1. Use «Magnetic Declination by Major City» to determine declination angle,
page 52-55.
2. Hold down the Compass Button for 3 seconds to select setting display.
3. When the «CAL» is displayed, keep the watch parallel to the horizon, and
steadily rotate the watch clockwise for two full rotations (the indicators will
move in a clockwise direction automatically).
4. After the two rotations, the first step of the calibration is completed.
5. While the indicators are still moving, press the Compass Button to set the
Magnetic Declination.
6. Use the Day Button to increase the setting (from –90 to 90) until the
desired setting appears.
7. When completed, press the Date Button to return to the previous setting.