Table Des Matières; Precautions And General Guidelines - Panduit BT75SDT Mode D'emploi

PRECAUTIONS AND GENERAL GUIDELINES ..................................................................................................... 1
TOOL SPECIFICATIONS ......................................................................................................................................... 2
TOOL ASSEMBLY ................................................................................................................................................... 3
TOOL OPERATION .................................................................................................................................................. 3
CLEANING INSTRUCTIONS ................................................................................................................................... 6
MAINTENANCE ....................................................................................................................................................... 8
NOTE: In the interest of higher quality and value, Panduit products are continually being improved
English
and updated. Consequently, pictures may vary from the enclosed product.
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended
as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results
or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For
specific dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or
a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.

PRECAUTIONS AND GENERAL GUIDELINES

This symbol is used to call your attention to hazards or unsafe practices which could result in an
injury or property damage. The signal word, defined below, indicates the severity of the hazard.
The message after the signal word provides information for preventing or avoiding the hazard.
WARNING
CAUTION
Read and understand all of the instructions and safety information in this manual before
operating or servicing this tool.
Wear eye protection when operating or servicing this tool.
Failure to wear eye protection can result in serious eye injury from flying debris or hydraulic oil.
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or nearby
personnel.
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
The tool is designed for hand-held operation.
Protect the tool from rain and moisture.
Use this tool for the manufacturer's intended purpose only.
BT75SDT_ENGL: PA26102A01_02
BT75SDT: ENGLISH
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury or property
damage.
WARNING
WARNING
WARNING
CAUTION
Page: 1 of 18 12-2010