Annexe 1. Equivalence Des Codes D'erreur Du Systeme Et Des Dispositifs - Cashkeeper CK-900 Manuel D'utilisation

ANNEXE 1. EQUIVALENCE DES CODES D'ERREUR DU SYSTEME ET DES DISPOSITIFS

Codes d'erreur du systeme
Code Message
1 Uninitialized communication
2 Device busy. The command cannot be processed
3 It is not possible to enable the device
4 Security lock (MaxPayout exceeded)
5 Fraud attempted
6 Device out of service
7 Coin jammed in output device
8 Note jammed on secure zone
9 Note jammed on insecure zone
10 Note jammed
11 Device/s unconnected
12 Error on loading configuration data
13 Error in output data
14 Sockets Communications error
15 Error COM port opening
16 Error COM port closing
17 Error on devices reset
18 Unexpected device reset detected
19 Ports configuration error
20 Error initializing devices
21 Exceeded limit on coin cashbox
22 Stacker full
23 Payment refused by the operator
24 The value must be between 100.000 and 9.999.999
25 Enable devices error
26 SSLCash not found. Unable to initiate communication with CashKeeper
27 Exceeded time to find the necessary coins for the payment. Retry the payment
28 Error when verifying the note value for payment. Retry the payment.
29 Recovered communication error
30 Communication with device error
31 Internal device error
32 There is no enough amount for the payment
33 Notes CashBox removed
34 Device_ID value not supported
35 Time limit exceeded for the command execution
36 Device not enabled. The command cannot be processed
37 Device not available. The command cannot be processed
38 Not supported mode
39 Not supported value
40 Not supported values: number of denominations and values distinct
41 The device is already processing this command
42 An unexpected error occurred when executing the command
43 Incorrect device drivers
44 Error reading EEPROM
45 There are no notes and coins entry logs
33 / 38