Idylis 0416709 Mode D'emploi page 4

ASSEMBLY INSTRUCTIONS
1. Insert tube adapter (M) through the back of the hole
in the window panel (P).
2. Using the 4 screws (N) supplied, secure the tube
adapter (M) from the front of the window panel
(P).
Hardware Used
x4
M
3. Insert window panel extension (O) into the window
panel (P). Lightly tighten the pre-assembled screws
in the window panel (P) to hold the extension (O) in
place.
1
M
2
M
N
3
P
O
Screws (included)
Lowes.com
6
ASSEMBLY INSTRUCTIONS
4. Select a suitable location for the unit, making
sure you have access to an electrical outlet.
P
5. Install the window panel (P) by expanding it to fi t
the length of the window and fully tightening the
pre-assembled screws in the middle.
P
6. Attach an exhaust nozzle connector (L) to each
side of the exhaust hose (K). Then, install one
end of the exhaust hose (K) to the air oulet (F)
on the rear side of the unit, and the other end
of the exhaust hose into the opening in the
window panel (P). The minimum length of the
exhaust hose is 21-13/20 in. and the maximum
length is 66-3/20 in. when fully extended.
4
Window
Electrical outlet
5
Horizontal Window
O
P
Screws come attached
O
Screws come attached
P
Vertical Window
6
L
K
REAR OF UNIT
L
F
Lowes.com
7
P