Honeywell HZ-910 Serie Mode D'emploi page 2

HZ-910_930_OM_Rev2.qxd
IMPORTANT SAFETY INSTRUCTIONS REGARDING THE PLUG ON YOUR PRODUCT
Fig. 1
HZ-910 SERIES OPERATION
• Place the heater on a firm, level, open surface free from obstructions
at least 3 feet (0.9m) away from any wall, furniture or combustible
material.
• With Power Knob in the OFF position, plug the heater into a grounded
outlet.
• Turn the Power Knob to HIGH to start the heater.
• Turn the Power Knob to OSCILLATE to engage side-to-side oscillation
while the heater is on.
• Turn the Power Knob to OFF and unplug the heater when not in use.
HZ-930 SERIES OPERATION
• Place the heater on a firm, level, open
surface free from obstructions at least 3
feet (0.9m) away from any wall, furniture
or combustible material.
• With Power Knob in the OFF ( ) position,
plug the heater into a grounded outlet.
• Turn the Power Knob to HIGH (
or Low ( ) (370W) to start the heater.
• Press the OSCILLATE button (
engage side-to-side oscillation while the
heater is on.
• Turn the Power Knob to OFF ( ) and unplug the heater when not in use.
NOTE: This product is equipped with a SafeGuard
SafeGuard ™ Alert Badge located on the top of the grill changes from black to red the grill is hot to the
touch.
Do not touch the grille until the unit has been turned off and the SafeGuard
turned back to black.
6/10/05 4:15 PM Page 2
Power Output
Fig. 5
) (900W)
) to
™ Alert Heat Indicator Badge (Fig 6). When the
Fig. 2
Reset Button
Fig. 6
Oscillation
Heat
Button
Indicator
Badge
™ Alert Badge has