RHINO Manufacturing Avalanche! SRD20 Manuel D'assemblage Et D'utilisation

SnowRake! Pro 16 & Deluxe 20
3
1
2
5
Index File Name Part Name
1 SR-BRKT Snow Rake Storage Bracket
2 SR-HD Snow Rake Head
3 SR-HE Snow Rake Handle Extension
4 SR-VEG Snow Rake Vinyl End Grip
5 SR-WK Snow Rake Wheel Kit
4
Avalanche! Products by Rhino Manufacturing, Inc.
Email: sales@avalanche-snow.com\Web: www.avalanche-snow.com
Europe: 011 47 930 59 734 Website: www.avalanche-snow.eu
Avalanche ! Produits par Rhino Manufacturing, Inc.
US/Canada: Appel gratuit : 800-378-3088
E-mail : sales@avalanche-snow.com\Web: www.avalanche-snow.com
Europe: 011 47 930 59 734 Site Web: www.avalanche-snow.eu
Avalanche! Produkte von Rhino Manufacturing, Inc.
Qty.
1 USA/Kanada: Gebührenfrei: 800-378-3088
1
E-Mail: sales@avalanche-snow.com\Web: www.avalanche-snow.com
4
(5 with Deluxe 20)
Europa: 011 47 930 59 734 Webseite: www.avalanche-snow.eu
1
(Deluxe 20 only)
Avalanche! - Produkter av Rhino Manufacturing, Inc.
E-post: sales@avalanche-snow.com / Nettside: www.avalanche-snow.com
Europa: 011 47 930 59 734 Nettside: www.avalanche-snow.eu
US/Canada: Toll Free: 800-378-3088
US/Canada og Tollfri: 800-378-3088
Assembly & Operating Manual
SRD20 - Snow Rake Deluxe
ASSEMBLY INSTRUCTIONS:
a. Attach one snow rake pole (3) to the snow rake head (2) by pushing the silver snap button on the
pole and putting the pole in the large hole in the snow rake head (3). The silver button should lock
into place.
b. Attach the other four poles by pushing in silver button on pole & fitting into the end of another pole
until it lock in place.
c. Attach Vinyl end grip (4) onto end of last pole (this should be a snug fit)
For best results use on fresh snow – to help prevent Ice Dams.
Operating Instructions:
a. Place the rake head with poles attached approximately 1 ft. up on roof, pull down the snow, repeat
this process 1 ft. at a time.
*(If resistance occurs, STOP, Readjust & repeat process)*
DISASSEMBLE & STORAGE:
a. Take all poles apart
b. Snap poles into black bracket (1) (with storage clip facing upward)
c. Snap rake head onto black brackets storage clip (see figure 1.)
WARNING! Keep away from electrical wires. ** THIS PRODUCT DOES NOT REMOVE ICE DAMS **
US/Canada: Visit www.avalanche-snow.com Europe: Visit www.avalanche-snow.eu
your Avalanche!
ITEM PART # NAME
1 SR-BRKT Snow Rake Storage Bracket
2 SR-HD Snow Rake Head
3 SR-HE Snow Rake Handle Extensions
4 SR-VEG Snow Rake Vinyl End Grip
5 SR-WK Snow Rake Wheel Kit (2 Wheels)
Limited Warranty:
Avalanche Manufacturing warrants this equipment to be free from defects in material and workmanship under normal
use. *THIS PRODUCT DOES NOT REMOVE ICE DAMS* This warranty is extended to the original purchaser for a
period of 6 months from the date of purchase and is applicable only when the equipment is assembled and operated
in accordance with factory recommendations. The warranty does not extend to damage or wear caused by misuse,
abrasion, corrosion, negligence, accident, faulty assembly or tampering in a manner to impair its normal operation.
Return Policy:
All returns must be made within 30 days from the date of purchase. There is a 15% restocking fee that will be applied
to ALL orders unless covered by our warranty listed above. No freight charges will be refunded.
Return Procedure:
Requests for a return must be authorized through Avalanche prior to returning merchandise. Please call our toll free
number 1-800-378-3088 for a return authorization number.
for Parts & Accessories for
QTY
1
1
5
1
1 kit = 2