Safety Instructions - WATSEA TOP FLOW Mode D'emploi

TOP FLOW PUMP WITH VARIABLE FLOW RATE OF 100 TO 300 L /H
Thank you for buying one of our Watsea products. We hope that it will give you full satisfaction.
The TOP FLOW pump 303 is a small waterproof and silent compact pump.
It is ideal for the flow of water from a small aquarium or terrarium.
Waterproof, it also has a flow regulator.
Characteristics :
- For small aquarium or terrarium
- Seawater and freshwater
- Maximum water height: 75 cm
- 5.8W Power
- Adjustable flow rate of 100 to max 300L / H
- Ø 13 mm tube

Safety instructions:

The following safety instructions must be respected to avoid any risk or electric shock.
Use this pump with the specified voltage and frequency as indicated on the product and in this
manual.
Please operate this pump within the specified voltage and frequency rating as indicated on the pump
rating label & manual instructions.
A 10mA residual current device must be fitted to the mains supply to keep safe.
Before cleaning or moving the pump, always disconnect it from its power sources.
The power cord is not replaceable. If the power cord or the plug is damaged, stop using the pump
immediately.
DO NOT attempt to change plug or shorten the power supply cord by yourself. Keep the plug dry at all
times.
DO NOT lift or pull the pump by its power cord to move. We recommend fitting a lifting cord to the
handle of the pump for moving and maintenance actions.
DO NOT operate or leave the pump in freezing conditions. If you live in a hard water area (water with
high levels of calcium or limescale content), the pump, rotor assembly & inside of motor should be
cleaned at regular intervals (see MAINTENANCE & CLEANING section).
Do not use the appliance for any other purpose than that specified in the operating instructions.
This product must be kept out of the reach of children.
5