Samsung NV51K7770 Serie Manuel D'utilisation page 14

Installation instructions
4-Wire Cable from Home Power Supply
IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local
codes do not allow grounding through neutral, New Branch circuit installations
(1996 NEC), mobile homes and recreational vehicles, new construction and in
Canada.
A
B
C
D
A. Cable from home power
supply
B. Black wires (normally L1)
C. Red wires (normally L2)
D. 4-wire flexible conduit from
oven
E. Junction box
F. White wires (normally
N-neutral)
G. UL listed wire connectors
H. green wires (normally
G-ground)
UL listed or CSA approved
I.
conduit connector
14 English
Install_NW9000K_DG68-00862A-07_EN.indd 14
1. Connect the 2 black wires (B) together
using a UL listed wire connector.
E
2. Connect the 2 red wires (C) together
F
using a UL listed wire connector.
G
3. Untwist white wire from green (or bare)
ground wire coming from the oven.
4. Connect the 2 white wires (F) together
H
using a UL listed wire connector.
5. Connect the green (or bare) ground
I
wire (H) from the oven cable to the
green (or bare) ground wire (in the
junction box) using a UL listed wire
connector.
6. Install junction box cover.
3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply where local codes
permit a 3-wire connection.
1.
A
B
2.
G
C
H
D
3.
I
4.
E
F
Cable from home power
A.
supply
B. Junction box
C. Black wires (normally L1)
D. White wires (normally
N-neutral)
E. green wires (normally
G-ground)
F. 4-wire flexible conduit from
oven
G. Red wires (normally L2)
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
Connect the 2 black wires (C) together
using a UL listed wire connector.
Connect the 2 white wires (D) and
the green (or bare) ground wire (of
the oven cable) using a UL listed wire
connector.
Connect the 2 red wires (G) together
using a UL listed wire connector.
Install junction box cover.
2019-02-08 4:43:32