Ec Declaration Of Conformity; Environmental Protection - ayerbe AY-115-PROF Consignes D'origine

replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
tROUBLESHOOtING
Although your new angle grinder is really
very simple to operate, if you do experience
problems, please check the following:
1.If your grinder will not operate check the
power at the main plug.
2.If your grinder wheel wobbles or vibrates,
check that outer flange is tight, check that
the wheel is correctly located on the flange
plate.
3.If there is any evidence that the wheel is
damaged do not use as the damaged wheel
may disintegrate, remove it and replace
with a new wheel. Dispose of old wheels
sensibly.
4.If working on aluminum or a similar soft
alloy, the wheel will soon become clogged
and will not grind effectively.
ENVIRONMENtAL
PROtECtION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice.
40
ORIGINAL INStRUCtIONS
910W ANGLE GRINDER
EC DECLARAtION OF
CONFORMItY
We,
Declare that the product,
Angle grinder
PGA115t
Complies with the essential health and
safety requirements of the following
directive:
EC Machinery Directive
98/37/EC (valid till Dec.28, 2009)
2006/42/EC (valid since Dec.29, 2009)
EC Low Voltage Directive
2006/95/EC
EC Electromagnetic Compatibility Directive
2004/108/EC
Standards and technical specifications
referred to:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-3
2009.12.24
EN