Safety Instructions; Warning; Standards & Regulations - VWR 1000 Mode D'emploi

s I
afeTy nsTruCTIons
Please read the entire instruction manual before operating the Large Capacity
Stirrer.
WArNiNg! DO NOt use the Large Capacity Stirrer in a hazardous
atmosphere or with hazardous materials for which the unit was not
designed. Also, the user should be aware that the protection provided by
the equipment may be impaired if used with accessories not provided or
recommended by the manufacturer, or used in a manner not specified by
the manufacturer.
Always operate unit on a level surface for best performance and
maximum safety.
DO NOt lift unit by the top plate.
Heavy walled glass or polypropylene container recommended when
stirring at high speeds. If spin bar de-couples at higher speeds, thin
walled glass containers may break.
CAutiON! To avoid electrical shock, completely cut off power to the unit
by disconnecting the power cord from the unit or unplug from the wall
outlet. Disconnect unit from the power supply prior to maintenance and
servicing.
Spills should be removed promptly. DO NOt immerse the unit for
cleaning.
DO NOt operate the unit if it shows signs of electrical or mechanical
damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
s & r
Tandards egulaTIons
VWR international hereby declares under its sole responsibility that the products
comply with the requirements of the following directives and associated standards:
Associated Eu Directives:
EMC directive 2004/108/EC
LVD directive 2006/95/EC
WEEE directive 2011/19/EU
ROSH directive 2011/65/EU
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment for
measurement, control and laboratory use. Part:
General Requirements.
IEC 61010-2-051 Part II: Particular requirements for laboratory
equipment for mixing and stirring.
UL Std. No. 61010-1
CSA/CAN C22.2 No. 0-M91
CSA/CAN C22.2 No. 61010-1-04
EMC standards:
EN61000-3-2 EN61000-3-3
EN61000-4-2 EN61000-4-3
EN61000-4-4 EN61000-4-5
EN61000-4-6 EN61000-4-11
IEC 61326
EN