Safety Instructions - Koenic KMF 240 Mode D'emploi

Safety instructions

Read this manual before first use
thoroughly. It contains important
information for your safety as well as
for the use and maintenance of the
equipment.
Keep this manual for future reference
and pass it on with the product.
Pay particular attention to the warnings
on the product and in this manual.
Use the product only for its intended
purpose. Improper use may lead to
hazards.
In the event of improper use or wrong
operation, we do not accept any liability
for resulting damages.
The use of accessories and components
not expressly recommended by the
manufacturer may result in injuries or
damages and voids the warranty.
Never leave the product unsupervised
while it is switched on.
Do not place heavy objects on top of the
product.
Never immerse electrical parts of the
product in water during cleaning or
operation. Never hold the product under
running water.
Do not under any circumstances attempt
to repair the product yourself. For
servicing and repairs, please consult an
authorised service agent.
This product is not intended to be used
by persons (including children) with
reduced physical, sensory or mental
abilities or lack of experience and /
or lack of knowledge unless they are
supervised by a person responsible
for their safety or have received
instructions on how to use the product.
Children should be supervised to ensure
that they do not play with the product.
KMF240_A5_130322.indb 15
The mains voltage must match the
information on the rating label of the
product.
The power plug is used as the
disconnect device. Please be sure that
the power plug is in operable condition.
Only unplug from the power socket can
separate the product completely from
the mains.
Avoid damages to the power cord that
may be caused by kinks or contact with
sharp corners.
Keep this product including power
cord and power plug away from all
heat sources like for example, ovens,
hot plates and other heat-producing
products/objects.
Only unplug from the power socket by
the plug itself. Do not pull on the cord.
Unplug the product ...
- when the product is not being used,
- in case of malfunctions,
- before attaching / detaching
accessories and
- before cleaning the product.
If the power cord or the casing of the
product is damaged or if the product is
dropped, the product may not be used
before it is examined by an authorised
service agent.
A damaged power cord may only be
replaced by the authorised service agent
in order to avoid hazards.
Caution! In order to prevent hazards
from unintentional resetting of the
protective temperature limiter, this
product must not be powered by an
external switching device such as a
timer, or connected to a circuit which
is regularly switched on and off by a
device.
English
15
22/3/13 3:16 PM