Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 4 Serie Mode D'emploi

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The position of power input port may differ depending on the model.
TV Rear Panel
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
1
Selecting a language
2
Selecting Store Demo
or home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
Viewing the hD
Connection guide
7
Enjoy your TV.
If You Want to Reset This Feature...
O
MEnUm → Setup → Plug & Play → EnTERE

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the EnTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the EnTERE button.
y Select the home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the ▲ or ▼ button, then press the EnTERE button. Select Air, Cable or Auto.
✎
In Cable mode, you can select the correct signal source among STD, hRC, and IRC
by pressing the ▲, ▼, ◄ or ► button, then press the EnTERE button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 12)
✎
Press the EnTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎
If you select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the EnTERE button.
VHF/UHF Antenna
Cable
or
MEnU for 5 sec.
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Melody
POWER
P
MEDIA.P
: English
SLEEP
: Off
: Medium
7
English