Led Status - EcoxGear EcoPebble Manuel De L'utilisateur

Power, Connections & INDICATORS
Fully charge your ECOPEBBLE BEFORE you power ON for best performance. Connect the USB INPUT to the
USB micro cable and a power source to charge your ECOPEBBLE.
When charged, set the Main Power Switch to ON. Press the Standby Power Button to power on the
ECOPEBBLE from standby mode and to return to standby mode.
RECOMMENDATION: Use the USB cable included with the ECOPEBBLE.

LED STATUS

Power ON /
Charging*
Bluetooth Paired
Bluetooth Pairing
Full Charge*
Ready / Power ON
*when connected with USB cable
• POWER FEATURE: STANDBY Power will NOT operate when the Main Power Switch is set OFF.
Once the Main Power Switch is set to ON, use the Standby Button to turn the unit ON/OFF.
• When not in use for extended periods, turn the Master Power OFF to preserve battery life.
Bluetooth Pairing & Audio
CONNECTING WITH BLUETOOTH: CONNECT TO YOUR SMART DEVICE & PLAY AUDIO
When your ECOPEBBLE is turned Your ECOPEBBLE should sync & wirelessly
ON, the LED light on the back panel pair with most Bluetooth enabled devices.
will flash BLUE, indicating the unit is The unit remembers the last device
powered ON and ready to pair. The paired and will automatically search for
unit shall also announce "Power ON" previous connections when the speaker
or "Power ON, Pairing Ready" when is turned ON from Standby or when a
powered ON. device comes back into Bluetooth range.
If a connection is dropped, the speaker
Turn on your Smartphone's Bluetooth.
will look to re-establish that connection.
Set the Smartphone to pairing mode.
If Bluetooth is turned OFF on your
Available Bluetooth connections shall
Smartphone, the ECOPEBBLE may not
appear. Select 'ECOXGEAR' from the
automatically look for the device.
list of discovered devices on your
Smartphone. Wait a few seconds until PAIRING MODE
the connection is completed.
When paired, if you wish to put your
When the ECOXGEAR selection is ECOPEBBLE in pairing mode you can
made and the Bluetooth connection turn off Bluetooth on the Smartphone
is complete, your ECOPEBBLE connected to the device or turn the Main
announces, "Bluetooth connected." Power Switch OFF/ON. Your ECOPEBBLE
Once connected, select and play your should announce, "Power ON, Pairing
desired audio. ready" when main power is turned back
ON and the device is ready to pair to a
Bluetooth connection.
RECOMMENDATION: If you are not
familiar with Bluetooth pairing for
your Smartphone or other Smart-
Device, refer to the User Guide for
your Smartphone to learn how to add
and pair a new device (ECOPEBBLE for
instance) to your Smartphone using
Bluetooth.
BLUETOOTH PAIRING &
CONNECTIONS
Once paired, should you have an
issue switching between Bluetooth
connections between devices, open
the Bluetooth Section within the
device currently connected to the
ECOPEBBLE and delete the Bluetooth
connection. The ECOPEBBLE will
then be available to pair & connect
to an alternate Bluetooth enabled
Smartphone / Audio Device.