Chameleon Lighting HMI-1-SV2 Instructions D'utilisation

Operating Instructions for Chameleon Lighting HMI Wall Control Unit
***Warning risk of fire or shock. Always disconnect power before installation.
Notes:
• This control unit will only work with Chameleon Lighting SV2 power supply fixtures
The wall control unit is capable of 120-277 volt installations
•
• Connect Black (hot) White (neutral) and Green (ground) wires to building power
• The wall control unit MUST be within 50 feet if the first light fixture being controlled
OPERATING INSTRUCTIONS:
CHANGING LIGHT AND INTENSITY:
• Use the + / - buttons to raise and lower intensity
• Use the up arrow to increase color CCT (cooler)
Use the down arrow button to lower the CCT (warmer)
•
STANDARD OPERATION
The top 3 buttons access user programmed settings
•
• The red button will turn off the HMI
A solid green LED light indicates the timer is engaged
•
ALL FUNCTIONS ARE SET UP VIA THE CHAMELEON LIGHTING BLUETOOTH DEVICE ENABLED APP
10 Strecker Rd/ Ellisville, MO 63011/ Ph. (888) 896-2101 / Fax (888) 896-2101
W W W . C H A M E L E O N L T G . C O M
HMI-1-SV2