Safety Instructions - Eurotops V 0268 Mode D'emploi

V 0268 / UF-268-02
Warning: Please read this instruction manual carefully before using the instrument
and keep it for future use.
A. SAFETY INSTRUCTIONS
1. The device is intended exclusively for private and not for commercial use. Only use
this device as describe in this instruction manual.
2. Do not place any part of this appliance in water or any other liquid.
3. Do not handle the unit or plug with wet hands.
4. When disconnecting the cable, always pull at the plug; do not pull on the cable
itself.
5. When using the device, always pull the power cord completely from its housing to
prevent overheating.
6. If the cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid an electric shock.
7. Never try to repair it by yourself. It must be repaired by the manufacturer or its
service agent or a similarly qualified person in order to avoid an electric shock.
8. The power cable must be checked regularly to avoid damage. If the power cable is
damaged it must be replaced by a qualified service center to avoid any danger.
9. Always place your device on a dry surface.
10. Do not use outdoors.
11. Do not let the power cord on the edge of a table or work surface, and prevent it
comes into contact with hot surfaces.
12. Keep it away from heat sources such as radiators, to avoid deformation of plastic
parts.
13. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
14. This unit is not designed to be operated by means of an external timer or a separate
remote control system.
Do not touch USB plug with wet hands.
Do not put crabstick, metal stick into the gap of fan.
Do not sparge insectifuge or flammability spray around the fan
DESK FAN WITH MIST EN
Do not use and store this fan in high temperature or surrounding of high humidity
Do not use the power adapter which not conform to the safety
Do not disassemble, repair, remould the fan
Switch off the power connection if no need
Stop using it when appearing the peculiar smell or abnormal noise during using.
B. HOW TO USE IT
1. Fill the water tank
Open the tank cap located above the fan.
Use the supplied bottle to fill the tank.
Close the tank cap.
Warning ! Before opening the appliance to fill the water tank,
always:
- Set the switch to the "OFF" position
- Make sure that the blades have stopped.
- Unplug the appliance if it was connected.
2. Connect the supplied USB cable to the fan on the one hand and to a USB source on the
other.
3. Press the SPRAY button once to use "mist" mode. Press a second time to turn it off.
4. Use the "1 / OFF" button to use the fan "speed 1" mode or use the "2" button to use the
fan "speed 2" mode.
5. When the fan is running in speed 1 or speed 2, press the "OSCILLATE" button once to
activate the oscillation speed 1. Press the "OSCILLATE" button a second time to activate the
oscillation speed 2. Press a third time to stop the swing.
6. Press the "1 / OFF" button to turn off the fan.
Never operate mist mode if the water tank is empty. This could irreversibly damage the
water filter or the unit itself.