Hints And Tips - Beko WKM 4226 B Mode D'emploi

2 Operation
2.1 Operation
C
Do not place the water tank (10)
on the base (8) while filling it with
water.
C
Never fill the water tank (10) above
the maximum level indicator (6) or
below the minimum level indicator.
Lid (3) should always be closed
C
during
otherwise the kettle will not switch
off automatically.
C
If you want to stop the heating
manually, push the On/Off switch
(7) upwards.
WARNING: Do not open the lid (3)
A
as hot water could splash out. Make
sure that no water splashes onto
the base (8).
C
If you want to continue the boiling
process, repeat the procedure from
1 to 10.
C
Let the kettle cool down between
each heating process.

Hints and Tips

• The kettle is equipped with a water filter (2)
which filters out limestone and other residues
when the water is being poured out.
• Use softened or filtered water to prevent lime
build-up.
10 / EN
the boiling process;
Kettle / User Manual