Lexus Hotspot Mode D'emploi page 12

restoring to factory Settings
If you forget some configuration parameters, you can restore the Lexus Hotspot to its factory settings and then configure the
Lexus Hotspot again.
Press and hold the reSeT button for more than three seconds, and then loosen. The Lexus Hotspot disconnects from the
network connection and then the indicators turn off. The Lexus Hotspot restarts and then is restored to its factory settings.
Reset
3 G
! Note:
After you carry out this operation, the Lexus Hotspot's personal configuration parameters will all be deleted. All
configurations on the web management page will be restored to the factory settings.
Tips
If you are unable to use the Lexus Hotspot as normal, try the following:
 Consult the online help on the web management page.
 Restart the Lexus Hotspot.
 Restore the Lexus Hotspot to the factory settings.
 Consult your operator.
update
You will receive a message on the web management page in case a software update is available. Select the update tab and
follow the instructions.
It is possible that your device loses connection to the Lexus Hotspot at the end of the update operation if another Wi-Fi device is
reached. In that case select the Lexus Hotspot again in the Wi-Fi devices list.
en Lexus Hotspot 11