Device Initialisation (Windows Environment) - Kingston DataTraveler 4000 Mode D'emploi

1. Insert the DT4000 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
• Windows XP users will receive a 'Found New
Hardware' notification as seen in
• Windows Vista/7 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
• Windows XP users can skip step 2 and go to
page 5 – Device initialisation.
• Windows Vista/7 users will see an AutoPlay
window similar to the one in
2. Select the option '
If Windows does not AutoPlay, simply browse to the
CD-ROM partition (
the DT4000_Launcher program. This will also start
the initialisation process.
Figure 2.4 – DT4000 contents

Device initialisation (Windows environment)

1. Select your language preference from the drop-down menu and click 'Next' (
Document No. 48000127-001.A04
Figure 2.2
Figure 2.3
Run DT4000_Launcher.exe
) and manually execute
Figure 2.4
.
Figure 2.1
.
Figure 2.2 – Device driver installation
.
'.
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialisation process automatically.
®
DataTraveler 4000
Figure 2.1 – Found New Hardware
(Windows XP)
(Windows Vista/7)
Figure 2.3 – AutoPlay window
(Windows Vista/7)
Figure 3.1
)
).
Page 4 of 28