Web Interface - Ramiaudio ODM808 Manuel Utilisateur

WEB INTERFACE

A / / Home page.
Real time alarm state. They
correspond to inputs GPI 1 to 8
alarms, mains or battery default. You
can name every input. See "Output
names".
Example :
GPI/1
8 GPI inputs alarms
Note : Without alarms, lights are off.
When an alarm occurs, its light bright red.
B / GSM configuration

PIN code and site name
Please the ODM808 site name (maximum of 15 letters). This name will appear in SMS heading.
Once setup is finished, do not forget to validate.
Rami
GPI/8
mains battery
default default
.
Mobile phone state display. Available
displays :
 Module works properly
 No Sim card
 Erroneous pin code
 PUK code requested
 Mobile phone disabled
GPO state (1 to 8). You can modify an output by clicking the
corresponding light. You can name every output. Use "Message
d'alarme" menu
Example :
Light for GPO/1.
Green light  output enabled, output at 1 (closed loop)
Light off  output disabled, output at 0 (open loop)
From factory the mobile phone is disabled.
Prior to first use, enable the GSM module
(stick the corresponding box) then enter
the PIN code, validate and restart from
"Reboot" menu.
33
ODM808