NX NXIMU010 Mode D'emploi page 6

Canadian Compliance
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
The device meets the exemption from the routine evaluation
limits in section 2.5 of RSS 102 and compliance with RSS-102
RF exposure. Users can obtain Canadian information on RF
exposure and compliance.
This radio transmitter with model: NXIMU010 has been
approved by Industry Canada to operate with the antenna
type listed below with the maximum permissible gain and
required antenna impedance for each antenna type indicated.
Antenna type not included in this list, having a gain greater
than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Antenna Internal
Manufacturer Waves Inc.
Brand N/A
Module Name N/A
Antenna Type Inverted S printed antenna
6
Connector N/A
Gain (dBi) 3.34
Frequency band 2.402–2.480 MHz
RF Exposure Info
The installer of this radio equipment must ensure that the
antenna is located or pointed such that it does not emit
RF field in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Heath
Canada's website www.hc-sc.gc.ca/rpb.
Class B Notice for Canada
This Class B digital apparatus complies with Canadian ICES-
003.
Dimensions 57 x 37 x 15 mm
Weight 18 g
Wireless Bluetooth 4.0 BLE
Maximum Range Approx. 7 m / 23 ft
Battery Type AAA 1.5V
Operating Time Approx. 40 hours
Standby Time Months
English
Model: NXIMU010
FCC ID: 2AIYP-41610
IC: 21654-41610