Sanitas SBY 98 Notice D'utilisation page 17

menu option and press the OK/Menu button.
You can now pan the camera image in the zoom window with the arrow
buttons.
Sound alarm
If the sound alarm is activated, an alarm tone sounds on the monitor as soon
as the camera registers a noise.
• To activate the sound alarm, select this menu option
OK/Menu button. If the sound alarm is activated, a small red dot appears
in the menu option .
Motion alarm
If the motion alarm is activated, an alarm tone sounds on the monitor as soon
as the camera registers a movement.
• In order to activate the motion alarm, select this menu option
press the OK/Menu button. If the motion alarm is activated, the thumb
lights up red in the menu option
Infrared night vision
In order to also see clearly visible transmission images in the dark, activate the
infrared night vision.
• To do this, select this menu option
the infrared night vision is activated, a bar lights up red in the menu option
.
and press the
and
.
and press the OK/Menu button. If
System settings
In this menu option, you can make the following settings:
Register
Here, you can synchronise the device signals of the camera and the monitor
with one another (pairing).
Power saving
You can activate the energy saving mode here.
If the device is in energy saving mode, no transmission image is displayed
on the monitor. The transmission image only reappears when any button is
pressed or the sound/motion alarm is triggered.
You can specify whether the energy saving mode should be activated after 10
or 30 seconds.
Language setting
You can change the menu language of the system settings here. You can
choose between German, English, French, Spanish and Italian.
Camera control
You can set the following parameters for your camera here:
Brightness, Contrast, Saturation and Frame Rate.
• In order to be able to set the parameters, you must first select the channel
number of your camera (e.g. CH1, CH2, etc.) with the arrow buttons.
Confirm your selection with the OK/Menu button. Now you can adjust the
individual parameters of the camera with the arrow buttons.
• To exit the menu again, press the On/Off button.
Version
The software version that is currently being used on the device can be read
off here.
17