Philips Memento Edition FM Série Mode D'emploi page 6

5 Click Search for the best driver for your device.Then click
the Next button.
Click Specify a location.Then click the Browse button.
When the dialog box appears, specify the folder where the
6
installation program is stored.
Click the OK button to close the dialog box.Then click the
7
Next button.
Click the Next button.
8
Click the Finish button.
9
> Installation of the driver starts.
> Once the installation process is complete, a drive icon for the
USB flash drive appears in the My Computer window.
After confirming that the drive is in standby mode you can remove
10
the drive from the computer's USB port.
4 Connect
Connecting the USB flash drive to your computer
Note
You can use a USB extension cable or an optional USB hub to connect
the USB flash drive to your computer.
Push the slider button upwards until it clicks into position and
1
the USB connector comes out (fig.1).
1
6