07 Connecting A Mobile Device; Connecting Via Bluetooth - Samsung HW-N450 Manuel D'utilisation

07 CONNECTING A MOBILE DEVICE

Connecting via Bluetooth

If the device fails to connect
The initial connection
(OR)
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
1. Press the PAIR button on the remote control to enter the "BT PAIRING" mode.
a. Press the
Change "BT" to "BT READY".
b. When "BT READY" appears, press and hold the
of the Soundbar for more than 5 seconds to display "BT PAIRING".
2. On your device, select "[AV] Samsung Soundbar Nxxx N-Series" from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → "BT"
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar Nxxx N-Series") appears
in the list, delete it.
• Then repeat steps 1 through 2.
NOTE
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY"
mode to reconnect.
Bluetooth device
(Source) button on the right side panel and then select "BT".
(Source) button on the right side panel
ENG - 18
OR