Description Of Symbols; Declaration Of Conformity; Specifications - GMC MRHD1500 Mode D'emploi

Environmental protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.

Description of symbols

The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Read instruction manual
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Double insulated for additional protection
Conforms to relevant legislation
and safety standards
EC Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: GMC
Declare that the
Name/ model: SDS PLUS ROTARY HAMMER DRILL 1500W
Product Code: MRHD1500
Net installed power: 1500W
Conforms to the following Directives:
• MACHINERY DIRECTIVE 2006/42/EC
• LOW VOLTAGE DIRECTIVE 2006/95/EC
• EMC DIRECTIVE 2004/108/EC
• ROHS DIRECTIVE 2002/95/EC
• EN60745-1:2009 • EN60745-2-6:2003+A1+A11+A2+A12
• EN55014-1:2006; EN55014-2:1997+A1+A2
• EN61000-3-3:2008; EN61000-3-2:2006+A1+A2
The technical documentation is kept by: GMC
Notified body: TUV RHEINLAND
Place of declaration: SHANGHAI, CHINA
Date: 09/11/12
Signed by: Director

Specifications

Voltage: 230–240V~ 50Hz
Power input: 1500W
No load speed: 270–780min-1
Chuck type: SDS-PLUS
Chuck type (Supplied as an accessory together with SDS
chuck adaptor): 13mm
GB
Keyed chuck Impact frequency: 880–2700bpm
Max. impact energy: 3.5J
Max. peak slip torque: 20-40Nm
Drilling capacity
Masonry: 36mm
Wood: 40mm
Steel: 13mm
Noise and Vibration Data
A Weighted Sound Pressure: 95dB(A)
A Weighted Sound Power: 106dB(A)
Uncertainty: 3dB(A)
Typical weighted vibration
Hammer drilling into concrete: 23m/s²
Chiselling: 17.4m/s²
Uncertainty: 1.5m/s²
Weight: 5.2kg
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures
3
GB