Victure AC700 Mode D'emploi page 26

To Start Recording:
To press the Shutter/OK Button. The camera Status Light(Blue) on the
left of screen and a Red Dot on the screen will flash while recording.
EN
Tips: If the camera starts recording automatically after powering on,
please check if you have turned on Car Mode.
To Stop Recording:
To press the Shutter/OK Button again. The camera Status Light(Blue)
on the left of screen and the Red Dot on the screen stop flashing to
indicate the recording has stopped.
To Turn On/Off the audio record:
To press the Down Button. The MIC icon will show the status on the
lower right corner of the screen.
Time-Lapse Video:
If you turn on the Time-lapse video in Video setting, there will be a
clock icon at the top of the camera screen. The number displayed on
the icon is the time of the video compression you set.
Tips: This camera automatically stops recording when the battery is
out of power. Your video will stored before the camera powers off.
This camera automatically stops recording when the SD card is full, if
the looping record function is turned off. Files will be overwritten in
recording order when the SD card is full, if the looping record
function is turned on.
22