Front Wheel Removal - YCF 50 A 2017 Manuel De L'utilisateur

FRONT WHEEL REMOVAL

It is strongly recommended that you do not remove and replace the wheels of your Mini-Motorbike yourself.
It you notice a problem with one of the wheels, then contact your nearest authorised YCF Mini-Motorbike
dealer for repair.
However, if you are an experienced motorbike mechanic, you can follow the instructions below to remove
the wheels:
FRONT WHEEL
(A) Front axle nut
(B) Front wheel axle
(C) Pinch bolts
Front Wheel Removal Procedure
1. Place the motorcycle on a centre stand for stability.
2. Unscrew the front axle nut (A), remove the front wheel axle (B).
3. Loosen the pinch bolts or nuts (C).
4. Pull the front wheel.
Front Wheel Installation Guidelines
1. Follow the same procedure as above in reverse order.
2. Torque the axle to 47 Nm (35 lb-ft) to ensure that the wheel spins freely and smoothly. Torque the
pinch bolts to 15 Nm (11 lbf-ft).
3. Check front brake adjustment.
B
138
English
WHEELS
C
A
A