Intended Use - aidapt VM975 Instructions D'utilisation Et D'entretien

INTRODUCTION
Thank you for deciding to purchase the Ezee Turn Steering Knob from Aidapt. The
Ezee Turn Steering Knob is manufactured from the finest materials available. When
used correctly it is designed to give many years of reliable, trouble-free service.
NB. This equipment must be installed by a competent person.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

Smooth operation for easy parking and increased manoeuvrability.
FITTING THE EZEE TURN STEERING KNOB
Open the metal band by releasing the screw-in fixing point
•
Fit the metal band around the steering wheel in a comfortable position
•
Tighten the metal band with the screw-in fixing point
•
INSTRUCTIONS FOR USE
The fitted steering knob can be used to turn the steering wheel with one
•
hand thanks to the smooth ball bearing action
It is especially useful for turning in tight spaces such as when parking
•
CLEANING
Clean your Ezee Turn Steering Knob using a non-abrasive cleaner or mild detergent
with a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may
damage the product beyond repair and should not be used.
Always ensure that you wipe dry the equipment after cleaning and use a liquid
dispersal agent, e.g. WD40 if necessary.
NB. Ensure that the steering knob itself is clean and dry and free from oily
residue to ensure a safe grip during use.
Usage and Maintenance Instructions
2
Ver. 2 08/2012 (2122)