Product Description; Keypad; Keypad Functions For Tester Ph5 / Cond5 / Pc5; Keypad Functions For Tester Ph1 And Cond1 - LABBOX 1 Série Mode D'emploi

PRODUCT DESCRIPTION

KEYPAD

pH5 / Cond5 / PC5

Keypad Functions for Tester pH5 / Cond5 / PC5

Button Function
ESC
MODE
CAL

Keypad Functions for Tester pH1 and Cond1

Button Function
CAL
Waterproof tester series
Press to switch on/off the meter.
Press to escape from setup menu or calibration procedure.
During measurement: Press to turn on/off the back light.
During measurement: Press to switch between
pH -> mV -> Cond -> TDS -> SAL
During Setup: Press to scroll in the menu or increase the value of the
selected parameter.
During measurement: press to start the calibration of the selected
parameter.
Press to confirm the calibration and setup value.
Press to switch on/off the meter.
During Setup: Press to scroll in the menu or increase the value of the
selected parameter.
During measurement: press to start the calibration of the selected
parameter.
Press to confirm the calibration and setup value.
pH1 / Cond1
Action
Action
3