Techno Line BC 250 Manuel D'utilisation page 24

START CHARGING THE RECHARGEABLE BATTERIES
After the transformer has been plugged to
the power source, user should insert a
rechargeable battery into the charging unit
and plug the DC jack into the battery
charger. Shortly afterwards, the battery
voltage (for example, "1.38V") will display.
Then the "Charge" sign will show on LCD
within 5 seconds, indicating that the
charging process with around 250mA is
going to start.
During charging, terminal voltage (in V)
(figure 3) and percentage (in %) (figure 4)
are the two items that will alternate to show
on the LCD.
Terminal voltage
Indication of
battery
(Figure 3)
charging
22