Charging Instructions - Ledwood LD-I9W-TWS Manuel De L'utilisateur

PACKAGE CONTENTS USB Charging Cable / Earphone Storage Warehouse / Earphone / Instruction
1. OPERATION INSTRUCTION Turn on automatically after opening the charging bin.
2. WIRELESS PARING
A. Open the charging bin and the two headphones will match automatically. Note: The products have been
matched well when they leave the factory, if there is no self-matching situation, Please put it in the charging
bin again and charge it for 5 seconds before removing it for automatic matching.
B. Click on phone settings > Wireless
C. Click the product search code to connect the headset
D. Wireless earphones connected successfully
Find the corresponding Wireless name TWS-I9W point from the Wireless list of mobile phones Click on the connec-
tion pair, about 5 seconds voice prompt connection success, left and right headphones There will be hint tone
"bang" light tone hint, the connection is successful.
When the same cell phone is used again, only the back hand of the earphone needs to be removed from the
charging bin.
Opportunity automatically completes the connection pairing operation. If used for another mobile phone, The
above matching steps need to be repeated.

3. CHARGING INSTRUCTIONS

4. POWER OFF It can shut down automatically when it is put into the charging bin.
5. CALL
4
Work indicator light, green light indicates sufficient power
Orange lights indicate insufficient electricity
Orange light flickers to indicate low power
White light indicates headphone discharge indicator
Orange LED indicates charging indicator
Touch
1 1
Connect Hang up
Long press
Refuse to accept