Reflecta x120 Mode D'emploi page 47

Insert SD Card Into The SD Card Slot
The golden prints of the card facing
upward when insert into the card slot.
Push with a slight force, the card will
automatically lock when it is in the
right position. Push once again will
unlock the card.
Turn on the power of the Copier:
After the electric power is connected, lift up the top cover,
press the Power On / OFF Button to turn on the scanner
for scanning film
The blue LED and the LCD screen will be lighted and
ready for film scanning. Select "NO" if the power is from
computer USB port.
"Yes" means you want to connect the SD card to the
computer for reading or downloading the contents in the
card.
Note:
For safety purpose, the power of the copier will
automatically turned off if it is left unused for more than
10 minutes. You may turn the power ON and OFF
anytime by pushing the Power On/Off button.
-9-